Dresden 2011 – wissenschaftliches Programm
Bereiche | Tage | Auswahl | Suche | Aktualisierungen | Downloads | Hilfe
HL: Fachverband Halbleiterphysik
HL 88: Lasers
HL 88.8: Vortrag
Freitag, 18. März 2011, 12:15–12:30, POT 151
Three-section DBR lasers based on surface defined gratings for high speed telecommunication applications — •S. Afzal1, F. Schnabel1, W. Scholz1, J. P. Reithmaier1, A. Capua2, E. Shumakher2, G. Eisenstein2, O. Parillaud3, M. Krakowski3, I. Montrosset4, and M. Vallone4 — 1INA, University of Kassel. — 2Technion, Israel. — 3Alcatel-III-V Lab, France. — 4Politecnico di Torino, Italy.
To combine low-cost fabrication and high-speed data communication like 100 GBit/s, multi-section DBR lasers are developed with nanoimprint compatible surface defined gratings. This laser design has the potential to enhance the modulation bandwidth by exciting a higher order optical mode, the so-called photon-photon resonance (PPR). ICP-RIE etching was used to transfer the e-beam exposed surface pattern in one step into the semiconductor. High aspect ratios of > 1:15, vertical trenches with a width of about 140 nm and an etch depth of > 2 um were obtained for the lateral gratings. The three-section lasers are fabricated on a MOVPE grown 1.5 um InP laser material exhibiting CW threshold currents of 94 mA for a 0.9 mm long device. A side mode suppression ratio of > 50 dB could be achieved demonstrating a high enough coupling strength of the lateral gratings. The influence of different operation conditions (currents, temperature) and dependence on the grating period on threshold current and emission wavelength are studied and will be discussed. First high frequency measurements in operation conditions without PPR enhancement show a -3dB bandwidth of about 15 GHz.