 |
09:30 |
HL 6.1 |
Formation process of the CIGSe absorber layers in a two stage sequential process — •Sven Schönherr, Philipp Schöppe, Michael Oertel, Udo Reislöhner, and Carsten Ronning
|
|
|
|
09:45 |
HL 6.2 |
The beneficial effect of Rubidium in Cu(In,Ga)Se2 solar cells — •Philipp Schöppe, Sven Schönherr, Roland Wuerz, Wolfgang Wisniewski, Gema Martínez-Criado, Maurizio Ritzer, Konrad Ritter, Carsten Ronning, and Claudia Sarah Schnohr
|
|
|
|
10:00 |
HL 6.3 |
Computational investigation of quantum well superlattice solar cells — Urs Aeberhard and •Jose Maria Ulloa
|
|
|
|
10:15 |
HL 6.4 |
Band-gap tuning of Cu2ZnSn(S,Se)4 solar cell absorbers via defined adjustment of the chalcogenide ratio using a post-sulphurization process — •Markus Neuwirth, Elisabeth Seydel, Jasmin Seeger, Alexander Welle, Heinz Kalt, and Michael Hetterich
|
|
|
|
10:30 |
HL 6.5 |
Element-specific atomic-scale structure of Cu2(Zn,Fe)SnS4 kesterite-stannite alloys — •Cora Preiss, Konrad Ritter, Stefanie Eckner, Philipp Schöppe, Susan Schorr, and Claudia S. Schnohr
|
|
|
|
10:45 |
HL 6.6 |
CZTSe solar cells prepared by co-evaporation of Cu-Sn/CZTSe/ZnSe/CZTSe layer stacks — •Lwitiko Mwakyusa, Markus Neuwirth, Ulrich Paetzold, Bryce Richards, Heinz Kalt, and Michael Hetterich
|
|
|
|
11:00 |
HL 6.7 |
Atomic-scale structure of Cu2Zn(Sn,Ge)Se4 kesterite alloys — •Konrad Ritter, Cora Preiß, Galina Gurieva, René Gunder, Stefanie Eckner, Roman Chernikov, Edmund Welter, Susan Schorr, and Claudia S. Schnohr
|
|
|
| |
11:15 |
|
15 min. break.
|
|
|
|
11:30 |
HL 6.8 |
Compositional inhomogeneity in kesterite thin film solar cell absorbers — •Maurizio Ritzer, Sven Schönherr, Philipp Schöppe, Sergio Giraldo, Gerardo Larramona, Galina Gurieva, Konrad Ritter, Gema Martínez-Criado, Susan Schorr, Gilles Dennler, Edgardo Saucedo, Carsten Ronning, and Claudia S. Schnohr
|
|
|
|
11:45 |
HL 6.9 |
Identification of transparent p-type conducting non-oxide materials from high-throughput calculations — •Ramya Kormath Madam, Thomas Kühne, and Hossein Mirhosseini
|
|
|
|
12:00 |
HL 6.10 |
High-Throughput Computational Assessment of Previously Synthesized Semiconductors for Photovoltaic and Photoelectrochemical Devices — Korina Kuhar, •Mohnish Pandey, Kristian Thygesen, and Karsten Jacobsen
|
|
|
|
12:15 |
HL 6.11 |
Aluminum oxide passivation layers for Cu(In,Ga)Se2 thin-film solar cells — •Florian Werner, Conrad Spindler, Susanne Siebentritt, Dimitri Zielke, and Jan Schmidt
|
|
|
|
12:30 |
HL 6.12 |
Insight into local fluctuations of net doping and lifetime in Cu(In,Ga)Se2 solar cells — •Maximilian Krause, Aleksandra Nikolaeva, Jose Marquez, Charles Hages, Sergej Levcenko, Thomas Unold, Wolfram Witte, Dimitrios Hariskos, and Daniel Abou-Ras
|
|
|
|
12:45 |
HL 6.13 |
Inhomogeneities in wide-gap Cu(In,Ga)Se2 solar cells — •Aleksandra Nikolaeva, Maximilian Krause, Jose Marquez, Charles Hages, Sergej Levcenko, Thomas Unold, Wolfram Witte, Dimitrios Hariskos, and Daniel Abou-Ras
|
|
|
