Würzburg 2018 – scientific programme
Parts | Days | Selection | Search | Updates | Downloads | Help
AKBP: Arbeitskreis Beschleunigerphysik
AKBP 8: Poster session
AKBP 8.4: Poster
Wednesday, March 21, 2018, 18:00–19:30, NW-Bau - HS2
Bunch Shape Measurement at the GSI CW-Linac Prototype — •Thomas Sieber1, Peter Forck1, Winfried Barth1, Viktor Gettmann1, Maxym Miski-Oglu1, Stepan Yaramyshev1, Florian Dziuba1, Manuel Heilmann1, Thorsten Kürzeder1, Alexander Feschenko2, and Sergei Gavrilov2 — 1GSI Darmstadt — 2INR Moscow
The existing GSI accelerator will become the injector for FAIR. To preserve and enhance the current experimental program at UNILAC, a dedicated new Linac is under development, which shall run in parallel to the FAIR injector, providing cw-beams of ions at energies from 3.5 MeV/u to 7.3 MeV/u. For this cw-Linac a superconducting prototype cavity has been developed and was first operated with beam in summer 2017. The resonator is a Cross-bar H-structure (CH) of 0.7 m length, with a resonant frequency of 216.8 MHz. It has been installed behind the GSI High Charge State Injector (HLI), which provided 108 MHz bunches of 1.4 MeV/u Ar6+, Ar9+ and Ar11+ ions at a duty cycle of 25 %. Due to the frequency jump and small longitudinal acceptance of the CH, proper matching of the HLI beam to the prototype was required. The bunch properties of the injected beam as well as the effect of different phase- and amplitude-settings of the cavity were measured in detail with a bunch shape monitor (BSM) fabricated at INR, Moscow, while the mean energy was analyzed by time of flight method. In this contribution, the bunch shape measurements are described and the capabilities of the used BSM measurement principle are discussed.